1. Measurement parameters : Z, L, C, DCR, ESR, D, Q, and q
2. Test conditions : 100Hz, 120Hz, 1KHz, 10KHz, 100KHz(MT4080a only), 1Vrms, 0.25Vrms, 0.05Vrms
3. 0.2% basic accuracy
4. Dual LCD display
5. Very quickly response
6. Fully auto/manual selection
7. DC resistance measurement
8. Rechargeable battery/ AC powered
9. User friendly
10. Infrared Interface ( RS 232C)
D Accuracy
D accuracy De is given as
Accuracy applies when Dx (measured D value) < 0.1
When DX > 0.1, multiply De by (1+Dx)
Q Accerarcy
Q accuracy is given as
Where, Qx is the measure Q value, De is the relative D accuracy
Accuracy applies when Qx · De < 1
q Accerarcy
q accuracy q is given as
Measuring Speed
Fast : 4.5 meas. /sec
Slow : 2.5 meas. /sec
General:
Temperature : 0°C to 40°C (Operating), 20°C to 70°C (Storage)
Relative Humidity : Up to 85%
Battery Type : NiMh or Alkaline (2AA size)
Battery Charge : Constant current 150 mA approximately
Battery Operation Life : 2.5 Hours typical
AC Operation : 110V/220V AC, 60/50Hz with proper Adapter
Low Power Warning : under 2.2V
Dimensions : 6.9" x 3.4" x 1.9" (LxWxH) (174mm x 86mm x 48mm) Weight : 470g
Order Information
MT4080A
100Hz to 100KHz Handheld LCR Merter
Standard Accessories
Shorting bar
DC 6V power adapter
AA-Size Ni-Mh rechargeable battery
Optional Test Fixtures/Accessories
TL08A SMD test probe
TL08B 4-wire test chips
TL08C 4-wire Kelvin chips
Carry case
RS232 To Infrared Adapter
 |
|
