FrequqencyDC to 20MHz
CH/TraceDual/Dual
Data ProcessAnalog
DisplayCRT
Set UpManual
SweepA only
Input signalpositive going signal decreases +5Vp-p or more signal cases intensity noticeable modulation at normal intensity setting
BandwidthDC to 2MHz(-3dB)
CouplingDC
Input impedance25kΩ - 30kΩ typical
Maximum input voltage30V(DC + peak AC)
DC coupled(-3dB)DC to 20MHz normal / DC to 10MHz magnified (CH 1 only)
AC coupled(-3dB) 10Hz to 20MHz normal / 10Hz to 10MHz magnified (CH 1 only)
Modes :
CH1, CH2, ADD, DUAL(CHOPTime/div. switch from 0.2s to 1ms,
ALTTime/div. switch from 0.5ms to 0.2µs)
Accuracynormal ±3%, magnified : ±5%(CH 1 only)
Input impedanceapprox. 1MΩ in parallel with 30pF
Maximum input voltagedirect 400V (DC + peak AC)
Input couplingAC, GND, DC
Rise time17.5ns or less (35ns or less in 5MAG)
CH1 output25mV/div. into 50Ω / DC to 10MHz(-3dB)
Polarity inversionCH2 only
Sweep modeNORM, X-Y, X 10, Variable
Accuracy±3%(0℃ to 35℃), ±5%(0℃~10℃, 35℃~40℃) / additional error for magnifier : ±2%
ModesAUTO, NORM, TV-V, TV-H
SourceVERT(DUAL/ALT), CH1, LINE, EXT
CouplingAC
Slope+ or –
External trigger inp 1MΩ ± 10%
Maximum input voltag400V (DC + AC peak)
Sensitivitysame as vertical deflection for both X-axis(CH1) and Y-axis(CH2) except accuracy ± 5% in X-axis
X-axis bandwidthDC to 500kHz (-3dB)
X-Y phase difference3°or less as DC to 50kHz
Probe adjustmentapprox. 1kHz frequency(20%), 0.5V(10%) square wave with 40-50%duty ratio
Line voltage range115V(98-125V) with 125V 1A fuse or 230V(198-250V) with 250V 0.5A fuse
Line frequency50/60Hz
Power consumptionapprox. 45W证书:CE
备注:Frequqency：DC to 20MHz
 |
|
