频率范围:9KHZ-2.2GHZ
Specifications:
Dynamic Range
Displayed Average Noise Level -
Preamplifier OFF: -117 dBm + 2.7 f (GHz) dB; Preamplifier ON: -132 dBm + 3.3 f (GHz) dB
RF Input: Connector type: N type. Impedance: 50 ohms nominal
10 MHz Reference Input: BNC female
Video Output: BNC female
External Trigger Input: BNC female
Gate Input: BNC female
Phone Output: Subminiature monophonic jack
GPIB Interface: IEEE-488 bus connector
Plotter: R9833, HP7470A, HP 7475A, HP7440A, HP7550A, HP2225A
RS-232C: D-SUB 9-pin
External Memory Card: slots: 2. Connector: JEIDA-Ver. 4.1/PCMCIA Rel. 2.0
Power Requirements:
AC input (use AC/DC adaptor A08180): 90 to 120 V; 220 to 240V
External DC input:
Voltage range: +10 to +15 V, Power
Consumption: 50 W maximum
Spectrum Analyzer
Measurement set-ups, limit lines, measurement results, and other data can be stored on memory cards that plug into either of two PCMCIA slots.
Frequency Range: 9 kHz to 2.2 GHz
Operate from Attach-on Optional Battery, Standard AC Adapter, or Direct 12-V DC
6-inch Color TFT LCD display
Built-in Counter
90 dB display dynamic range
EMI Measurement with built-in Quasi-peak detector and EMC filters
5.8 x 11.5 x 13 inch; 14.3 lbs
Additional Capabilities:
AM/FM detector and built-in speaker/headphone jack for signal demodulation
Faster measurements using built-in routines for: Occupied bandwidth; Adjacent channel leakage; Noise power; 2nd and 3rd order distortion; Percent AM
10 MHz external reference input for additional frequency accuracy
 |
|
